Skip to content

TWO WAY SPEAKER

BLUETOOTH (TWS)

PRO DG CMA-12BT 2-way Active Speaker

Power Handling500 W RMS (EIA 426A Standard) / 1000 W program / 2000 W peak. 

Nominal Impedance: 4 Ohm

Frequency Range: +/-3 dB between 50 Hz – 20 kHz.

Calculated Maximum SPL: / 1m / 127 dB peak.

WE LOVE WHAT WE DO AND DO

WHAT WE LOVE

Pro DG is a system that combines principles with loading techniques to produce a compelling compact Subwoofer with impressive Med-High impact. The low-frequency section of the is a comprised voice coil drivers Powered by Pro DG to produce a low-curvature vertical wavefront with an efficiency and the Mid-Highs are Powered by Speakers Pro DG.

CMA-12BT


Indicator Light: Power / Signal / Limit.
TWS Button: Press once to enter True Wireless Stereo Bluetooth mode.
Bluetooth Button: Press once to connect a Bluetooth device or disconnect a paired Bluetoothdevice.
DSP Preset: There are three preset mode: Vocal / DJ / Live.
Jack L/R Input: Balanced L/R jack input for getting signals from mixers or preamplifiers.
XLR CH1/CH2 Input: Balanced XLR input for getting signals from mixers or preamplifiers.
XLR CH1/CH2 Output: Balanced XLR connectors connected in parallel to the inputs to connect
another device (e.g. another active speaker system).
Line Select Button: Press down for CH1 line output, press up for CH1/CH2 line output.
CH1/CH2 VOL: CH1/CH2 Volume Control.
BT/LINE Select Button: Press down for Bluetooth mode, press up for line mode.
Power Switch: Turns unit on or off.
Power Supply Voltage Switch: Select between 110V or 220V AC mains power.
AC Input: Please Use AC input cable from the original manufacturer only.

ACOUSTIC SPECIFICATIONS


⬜Power Handling 2000W Peak / 500W RMS
Nominal Impedance 4Ohms
Average Sensitivity 97dB
Maximum SPL Calculation 127 dB SPL @ 1m
Frequency Range 50 – 20000 Hz
Nominal Directivity 90° x 60°
Low / Mid Frequency Driver 12” steel frame woofer, 65mm VC, 50oz magnet
High Frequency Driver 34mm Ti. driver
Amplifier Class-D
Rigging Points 0
Connectors 2 XLR / Jack input channels with mic and line switch + RCA + XLR Link
Controls 2 Channels and 2 Mic Preamps + DSP with 3 presets Bluetooth & TWS function
Power Supply 110~220V 60/50HZ
Acoustic Enclosure PP
Finish Black paint
Grille 1.0mm
Mounting Options 35mm mounting